The Gas Hob Needs to Be Replaced After a Few Years

The service life of gas hobs is generally 8 years. If the cooker manufacturer has clearly stated the waste period, it should be subject to the statement of the cooker manufacturer, but the cooker manufacturer is required to expressly state that the waste period should not be lower than the specified 8 years. gas hobs that have reached their service life should be replaced as soon as possible to prevent safe use problems.

my country's city gas is mainly divided into three categories: artificial gas, natural gas, and liquefied petroleum gas. Each type of gas is also subdivided, such as artificial gas is divided into 5R, 6R, and 7R, and natural gas is divided into 10T, 12T, and 13T, which cannot be interchanged with each other. Before purchasing, you must know which kind of gas is used in the area where you live.

Gas hobs are divided into desktop and embedded, which need to be selected according to installation requirements. In addition, the embedded cooker panel materials include stainless steel, tempered glass, and enamel. Stainless steel is strong and resistant to collisions, but it will lose its luster after long-term use. Tempered glass is beautiful and corrosion-resistant, but its heat resistance is not as good as stainless steel. You can choose according to your personal preference.

The effective firepower of the cooker depends on the thermal load and thermal efficiency. These two indicators can be seen on the information nameplate on the rear shell of the cooker. The larger these two data are, the higher the heat efficiency and low energy consumption of the stove, and the greater the effective firepower. According to the national conditions and the pressure of pipeline gas, the heat load between 3.6-4.2KW is enough to meet the Chinese cooking habits.

The stove head has cast iron, aluminum alloy, and copper. The cast iron burner has high-temperature resistance and high hardness, and the aluminum alloy is light and rust-free, but the cost of die-casting is high, and the conditions for the use of gas sources are limited. The all-copper burner is resistant to high temperatures and corrosion and is not easy to rust.

Purchasing branded stoves not only has a good appearance and performance, but also guarantees quality, and after-sales service is also in place, which can save you a lot of worries.

In addition to the hood, which is the hardest-hit area of oil pollution in the kitchen, the gas hob is also a key cleaning object. If the oil stains and dirt are not cleaned for a long time, it is easy to cause the gas flame to become smaller. Because those oil stains will block the vent hole, in this case the gas hob not only wastes gas but also has great potential safety hazards. Therefore, for household gas hobs, it is generally recommended to thoroughly clean them once a quarter.

When using a gas hob, do not have a lot of water droplets on the bottom of the pot, which will easily cause the fire cover or fire outlet to rust, block the exhaust hole, and the flame will become smaller. Also, you must take a breath immediately after turning off the flame, otherwise, it is easy to cause a gas leakage accident. When disassembling or replacing the parts of the gas hob, pay attention to the correct operation, do not disassemble and reassemble randomly, and use it according to the instructions.

The above introduces the precautions when choosing and using a gas hob. If you have any questions or want to buy a gas hob, please contact us.

Greidea is a professional custom gas hob manufacturer. We have been committed to providing the best solutions and considerate services to our customers and strategic partners. In our R&D department, 16 engineers are employed to guarantee our R&D advantage and continuous improvement. Spend 3% of revenue annually on research and development. With an excellent manufacturing team and quality control team, the annual output is 800,000 gas hobs and 300,000 range hoods, with first-class quality.